Fluid-applied, modified polyurethane waterproofing membranes for vertical and horizontal applications.
One-part, 100% solids, hot rubberized asphalt waterproofing membrane for vertical and horizontal applications.
Sheet-applied waterproofing membrane options for horizontal and vertical applications, including blindside walls, below slab-on-grade and backfilled walls.
HDPE/Bentonite sheet waterproofing membranes with expandable bentonite adhered to high density polyethylene (HDPE) for horizontal, vertical and lagging applications.
Tremco hybrid waterproofing systems consist of dual and triple membrane protection for applications such as blindside and underslab.
The TREMDrain Series consists of prefabricated drainage mats for vertical and horizontal applications with a variety of combinations of filter fabrics, drainage cores and protective polymeric film and a Total-Drain System to replace perforated pipe/aggregate collection systems.
Primer options include adhesives, solvent-based modified bituminous and low-oder or low-VOC.
Protection Courses designed to absorb the impact of aggregate shock, normal jobsite foot traffic and to protect the membrane waterproofing from penetration by sharp aggregate during backfilling, slab pouring and later settlement.
Tremco offers various reinforcing products that are used in conjunction with fluid-applied waterproofing membranes that provide benefits such thermal bonding.
A multi-composite waterstop with the self-sealing ability of bentonite used to seal cold joints in concrete.
Our waterproofing products have many products that can be used in conjunction with our waterproofing.
Check out these additional resources to help you find the right waterproofing solution for your project.
This guide is to help you make a waterproofing selection for your project. We have fluid, sheet or drainage options for vertical or horizontal solutions.
This brochure shows you various solutions we provided for projects across the U.S. We also give you suggestions of products to use for applications such as backfilled or blindside walls.
If you are looking for products ideal for cold weather applications or have rapid curing capabilities, take a look at the solutions in this brochure.
TREMproof, Paraseal and TREMDrain are just a few of the systems we offer that meet the complex and grueling demands of jobsite performance.
Below-Grade Waterproofing Brochure
TREMproof PUMA Flashing System is a quick-cure, liquid-applied waterproofing system that cures within 30 minutes and can be applied in below freezing temperatures. Watch this video to see how we detailed this split-slab application in Buffalo Heights, Houston.
The biggest challenge with a sports facility of this type is the seating components over occupied space which are concrete.
After continual exposure to the elements over the years, the sheet-applied waterproofing system below the paver and pedestal system had begun to fail at its numerous seams and moisture had begun infiltrating the occupied spaces.
A sheet membrane was the contractor’s preferred method for waterproofing underslab.
We offer an array of options and newest technologies for maximum protection and expedited schedules. Our knowledgeable, technical sales representative are available to discuss these options and how you can best prevent water intrusion.