Vulkem® 360NF/346/346 is a modified polyurethane traffic deck coating system composed of a base coat (360NF), heavy duty intermediate coat (346) and a top coat (346).
Minimum recommended cure times are as follows: Vulkem 350 with 950NF or 951NF Pedestrian Deck Coating is 12 hours. Vulkem 350/351 Pedestrian Deck Coating and the Vulkem 350/950NF/951NF Vehicular Traffic System are 24 hours. The Vulkem 350/346/346 Vehicular Traffic System is 72 hours. Please note that these are minimum recommended cure times and site-specific conditions, weather and temperature all impact cure rate and interlaminary adhesion development. Contact your local sales representative for project specific recommendations.
Prior to proceeding, existing moisture should be removed and the surface should be wiped with a compliant, non-alcohol based solvent or other approved cleaner. Contact Technical Services for recommendations. Allow the solvent to flash dry. Prime using either Vulkem 191 Primer or TREMprime Multi-Surface Urethane Primer. Primer selection is driven by local compliance and regulations and secondarily by contractor preference. Apply primer at recommended coverage rates found on the primer selection guide on the website. Dry times will vary by primer and will also be affected by temperature and humidity conditions. Vulkem 191 Primer should dry to a "tack" and Tremco Multi-Surface Urethane Primer should be allowed to fully dry prior to proceeding with application of the subsequent Vulkem coating. Please consult Tremco’s Technical Services team.
|Vulkem 360NF Gray SDS|
|Vulkem 360NF Gray SDS (CAN)|
|Vulkem 360NF Quick Cure Catalyst SDS|
|Vulkem 360NF Quick Cure Catalyst SDS (CAN)|
|Vulkem 346 Beige SDS|
|Vulkem 346 Beige SDS (CAN)|
|Vulkem 346 Gray SDS|
|Vulkem 346 Gray SDS (CAN)|
|Vulkem 346 Limestone SDS|
|Vulkem 346 Limestone SDS (CAN)|
|Vulkem 346 Maple SDS|
|Vulkem 346 Maple SDS (CAN)|
|Vulkem 346 Slate Gray SDS|
|Vulkem 346 Slate Gray SDS (CAN)|