Your direct line to the items you use most often – literature, samples or your own personal file cabinet.
Vulkem® 116 is a one-part, moisture-curing, gun-grade polyurethane sealant with superior primerless adhesion to porous substrates. It is durable, flexible, offers excellent performance in dynamic joints and is an excellent choice for sealing expansion joints in commercial construction applications. Vulkem 116 is also suitable for certain water immersion applications and is rated for 25% movement capability.
WARNING! Contains chemicals known to the State of California to cause cancer, birth defects and/or other reproductive harm.
FOR INDUSTRIAL USE ONLY! For use only by trained and experienced professional applicators.
This product has the following images and/or videos associated with it.
The service temperature range for polyurethane sealants is -40°F to 185°F (-40°C to 85°C).
Physically remove excess sealant by wiping, scraping or cutting. Residual traces of sealant can be removed by wiping the surface with a cloth or abrasive pad saturated with a solvent such as mineral spirits or xylene. Test a hidden area of the surface to be cleaned to ensure no adverse effects due to solvent interaction. Where abrasive pads are used, care should be exercised in order to ensure the surface appearance is not adversely effected.
The surface temperature of the substrate should be less than 150°F (66°C) at the time the sealant is applied.
The surface temperature of the substrate should be 40°F (4°C) and rising or above at the time the sealant is applied. It is also recommended that the sealant be stored at room temperature prior to application.
Polyurethane sealants are paintable once they are fully cured. Adhesion of the paint to the sealant should be evaluated through a site mockup to determine appropriateness of use. Additionally, for applications involving dynamically moving joints, it should be expected that the paint film will tear exposing the sealant below. For this reason, it is recommended that the sealant and the paint be of similar colors.
Curing of polyurethane sealants occurs at approximately 1/16” (1.66mm) depth per day at 75°F (24°C) and 50% RH. The cure time will increase as the temperature and/or humidity decreases. A good rule of thumb is an additional 24 hours of cure for every 10°F (-12°C) decrease in temperature.
The shelf life for Tremco polyurethanes is 6 to 24 months depending on type of sealant and/or packaging. Please contact Technical Service for specific shelf life of a product at 866-209-2404.
This guide only offers a general representation of our color offering. Colors viewed on a computer screen or printed will vary and will never be an exact representation of the actual pigment. When matching is critical, please refer to our color card or sample color strips.
Due to projected growth, as well as age & deterioration of present auxiliary facilities at McAlpine Locks, there was an imperative need for the Corps of Engineers to construct an additional 110’ x 1200’ lock.... Read More >
Please enter your ZIP: