Horizontal (PUMA)

TREMproof® PUMA is a cold-applied, waterproofing system that utilizes polyurethane-methacrylate (PUMA) technology. PUMA waterproofing systems offer superior elongation over traditional MMA/PMMA technology systems. TREMproof PUMA is composed of a primer (Tremco PUMA Primer) and a base coat (Tremco PUMA BC or Tremco PUMA BC LM). All system components are cured using Tremco PUMA Initiator.

Basic Uses
  • TREMproof PUMA is a cold-applied system designed for waterproofing concrete slabs and protecting occupied areas underneath from water damage.
  • This waterproofing system is ideal for split-slab, paver systems, planters and vegetated roofs.

Download Data Sheet get_app
Languages
Download
Find Your Sales Rep location_on
Frequently Asked Questions
  • Where can you use PUMA Technology?

    PUMA technology can be used in both traffic coating (Vulkem EWS) and below grade (TREMproof PUMA) applications.

  • What application conditions must the concrete adhere to before coating with Vulkem EWS or TREMproof PUMA?

    Concrete shall be water cured and attain a 4000 PSI minimum compressive strength for vehicular or heavy duty traffic and 3000 PSI minimum for pedestrian, buried or non-traffic bearing systems. All concrete shall be shotblast to a ICRI CSP #3-#4 finish. Moisture content in the concrete must be lower than 6% as measured using a Tramex CME 4 Moisture Meter. Depending on concrete construction and job site location, additional concrete testing may be required. Please contact your local Tremco Sales or Technical Representative.

  • How long between coats do I have to wait during the application of Vulkem EWS or TREMproof PUMA?

    Each layer of all PUMA technology systems cure in 30-45 minutes and the next coat can be applied at that time. In fact, they can be opened up to traffic one hour after installation is complete. Please contact your local Tremco Sales or Technical Representative when choosing the appropriate system for your application.

Data Sheets, Specs, Details And More