Your direct line to the items you use most often – literature, samples or your own personal file cabinet.
Tremco 440 Tape is a 100 percent solid Polyisobutylene cross-linked butyl, preformed sealant.
Tremco Acoustical Sealant was developed for acoustical sealing of drywall partitions, corridors and party walls.
Arrow-Shim Gaskets are used is recesses between sash and glass or plastic sheet in conjunction with a sealant cap bead.
Tremco Cellular Rubber Extrusions are fabricated into gaskets and accessories for use in sealing and glazing applications in building construction.
Tremco Curtainwall Sealant is a synthetic rubber, non-drying, non-skinning sealant with excellent adhesion.
Deckline Primer is a single-component, moisture-curing primer.
Deckseal is a sheet waterproofing membrane consisting of 20 mils of transparent HDPE and expandable, granular bentonite. The composite weight of the material is up to 1.0 lb/sq ft, creating a dual waterproofing system.
Dymeric® 240 is a multi-component, chemically-curing, epoxidized polyurethane sealant specially formulated for dynamically moving building joints.
Dymeric® 240FC is a multi-component, chemically-curing, epoxidized polyurethane sealant specially formulated for dynamically moving building joints.
Dymonic® is a high-performance, low modulus, one-component, moisture-curing, modified polyurethane joint sealant.
Dymonic® 100 is a high performance, medium-modulus, low-VOC, UV stable, non-sag polyurethane sealant.
Dymonic® FC is a low-modulus, one-component, moisture-cure, polyurethane hybrid sealant formulated with proprietary silane end-capped polymer technology.
Elastomeric Sheeting is classified as a thermoset material made of highest quality uncured neoprene rubber at a thickness of 60 mils (1.52mm).
Tremco EPDM Dense Rubber Extrusions are fabricated into gaskets and accessories (such as setting blocks, spacers and shims) for use in sealing and glazing applications in building construction.
ExoAir® Eco is an open-cell, flexible polyurethane foam tape impregnated with synthetic resin.
ExoAir® 110 and 110LT Self-Adhered Air and Vapor Membranes are 36 mils (.90 mm) of self-adhering SBS rubber asphalt laminated to a 4 mil (.10 mm) cross-laminated, high-density polyethylene film with a siliconized release liner.
ExoAir® 120 Fluid-Applied Air & Vapor Membrane is a monolithic, elastomeric membrane designed to seal exterior above-grade wall assemblies and prevent air infiltration/exfiltration, vapor transmission and water penetration.
ExoAir® 220 Fluid-Applied Vapor-Permeable Air Barrier Membrane is a monolithic, elastomeric membrane designed to be rolled on exterior above-grade wall assemblies to prevent air infiltration/exfiltration while remaining permeable to water vapor.
ExoAir® 230 is a fluid-applied, synthetic, vapor-permeable air barrier designed for use in commercial construction applications. It can be either roller- or trowel-applied to common substrates.
ExoAir® Duo Membrane is composed of a tear-proof woven fabric embedded into a polyethylene copolymer with a large expansion pleat for variable joint sizes and absorption of movement to create a unique window flashing membrane.
ExoAir® HTF (High Temperature Flashing) is a durable, self-adhering, flexible flashing specifically designed to withstand the rigors of a commercial construction site.
ExoAir® LEF is a single-component, moisture-curing, gun-grade polyurethane foam.
ExoAir® Primer is a VOC-compliant adhesive primer formulated for use with ExoAir 110/110LT and ExoAir TWF.
ExoAir® Termination Mastic is a single-component mastic formulated for use sealing or repairing ExoAir Air & Vapor Barriers.
ExoAir® Trio is an open-cell flexible polyurethane foam tape impregnated with synthetic resin.
ExoAir® TWF (Thru-Wall Flashing) is a 40-mil (1.0 mm) composite sheet of 32 mils (.80 mm) of self-adhering SBS rubberized asphalt laminated to an 8-mil (.20 mm) cross-laminated, high-density polyethylene film with a siliconized release liner.
Fyre-Caulk is an intumescent acrylic sealant for light commercial construction where both combustible and noncombustible through penetrations are present. (US only)
Glazing Spline profiles are extruded 70 durometer dense EPDM wedge profiles designed for use in compression glazing systems with Tremco POLYshim® II Glazing Tapes.
Gutter Seal is a one-part, high quality blend of synthetic rubber and resin for sealing gutters.
HDPE Protection/Barrier Courses are a series of high-density polyethylene (HDPE) sheets designed for both membrane protection as well as various barrier applications.
illmod 600® is a pre-compressed, self-expanding, flexible, polyurethane joint sealant that is designed to seal against wind-driven rain, sound, draft and dirt.
Tremco JS 562 Silicone Insulating Glass Sealant is a two-part, high modulus silicone sealant.
Mono® 555 is a high-solids, one-part, solvent-based acrylic sealant that offers excellent UV resistance and flexible workability.
Tremco Flame-Retardant Dense Neoprene Rubber Extrusions are fabricated into gaskets and accessories for use in sealing and glazing applications in building construction.
Para JT is an adhesive joint tape compound formulated with cross-linked polymeric elastomers. When used with Paraseal® GM, it creates double seals on all joints, forming two complete and independent waterproofing systems.
Paragranular is a premium, Wyoming type, high swelling, granular sodium bentonite. When in the presence of water, Paragranular reacts and forms an impervious waterproof gel.
Paramastic is an expandable mastic for use with Paraseal® waterproofing membrane.
Paraprimer® is an adhesive primer formulated to prepare construction surfaces prior to application of Parastick ‘n’ Dry®, Superstop and various tapes. Construction surfaces other than HDPE liner are always primed with Paraprimer prior to taping.
Paraseal® is a sheet waterproofing membrane consisting of 15 mils of HDPE and expandable, granular bentonite. The composite weight of the material is up to 1.0 lb/sq ft, creating a dual waterproofing system.
Paraseal® GM is a sheet waterproofing and gas-mitigating membrane consisting of 20 mils of HDPE and expandable, granular bentonite. The composite weight of the material is up to 1.0 lb/sq ft, creating a dual waterproofing system.
Paraseal GM/LG – 20 mil is a sheet waterproofing and gasmitigating membrane consisting of 20 mils of HDPE, expandable, granular bentonite and a protective layer of spun polypropylene. The HDPE extends beyond the bentonite on the perimeter edges to create a clean surface for Para JT Tape and Parastick ‘n’ Dry Tape installation.
Paraseal GM/LG – 60 mil is a sheet waterproofing and gasmitigating membrane consisting of 60 mils of HDPE, expandable granular bentonite and a protective layer of spun polypropylene. The HDPE extends beyond the bentonite on the perimeter edges to create a clean surface for extruded weld or wedge weld installation.
Paraseal® LG is a sheet waterproofing membrane consisting of 20 mils of HDPE, expandable, granular bentonite and a protective layer of spun polypropylene. The composite weight of the material is up to 1.0 lb/sq ft, creating a dual waterproofing membrane.
Paraseal® Paraterm Bar is an aluminum alloy specially formulated to exhibit excellent holding power. When fastened through pre-cut holes, Paraterm Bar provides tight, straight and extremely long-lived terminations, caulk troughs and drip edges.
Parastick 'n' Dry® is a laminate of bentonite applied to mesh with a pressure-sensitive adhesive on one side. Parastick ‘n’ Dry is used in conjunction with waterstops, waterproofing membranes, Paraseal® and Paramastic to assist in waterproofing difficult areas.
Permanent Seam Tape is a 4-inch wide x 60-mil thick (100mm x 1.5mm) rubberized asphalt membrane laminated to a polyethylene reinforcing film.
The Permaphalt™ System is an economical traffic-bearing system designed to provide long-term performance of the waterproofing membrane and a heavy-duty, skid-resistant driving surface.
Permaquik® Crystalline products are capillary waterproofing formulations of proprietary blends of chemicals, quartz sand and cement.
Tremco Peroxide EPDM Rubber Extrusions are fabricated into gaskets and accessories.
POLYshim® II Tape is a 100 percent solids, highly adhesive and elastic, cross-linked butyl preformed tape with a continuous integral EPDM shim.
Tremco Poly-Wej Gaskets are designed for use in compression glazing systems. They are available in both EPDM and Neoprene.
POWERply® Standard Smooth is a smooth-surfaced, modified bitumen membrane applied as an extremely heavy-duty protection course over TREMproof® 6100.
POWERply® Standard White Granular is a rough-surfaced, modified bitumen sheet used in conjunction with waterproofing membranes as an extremely heavy-duty protection course, primarily in horizontal applications.
Proglaze® is a one-part, moisture-curing, acetoxy silicone sealant, easily gunned under all types of weather conditions.
Proglaze® ETA is a patented transition assembly composed of pre-engineered, finished aluminum and silicone materials that are mechanically attached to the window and/or wall’s structural framing to insure a durable connection and seal.
Proglaze® ETA 3-D Molded Corner Connections are engineered in our 40 Durometer Dense Translucent Silicone used for making connections to our ExoAir® Air Barrier Membrane systems with Spectrem® 1 Silicone Sealant.
Proglaze® ETA Connections are pre-engineered silicone materials used as a transition assembly between the window or wall system and adjacent air and vapor barrier materials.
Proglaze® II is a two-part, high modulus silicone sealant. It consists of a white base component and a black curing agent that cures to a tough flexible rubber when mixed through a pump.
Proglaze® SSG is a one-part, high-modulus, neutral cure silicone sealant ideal for a wide variety of glazing applications.
SCR-820 Thermoplastic Rubber Extrusions are fabricated into gaskets and accessories for use in sealing and glazing applications in building construction.
SCR-880 Silicone-Compatible Rubber Extrusions are fabricated into gaskets and accessories for use in sealing and structural glazing applications in building construction.
SCR-900 Silicone-Compatible Rubber Extrusions are fabricated into gaskets and accessories for use in glazing applications and other building joint applications.
Tremco SGT-900 Series Structural Glazing Tapes are open-cell, high-density polyurethane foam tapes with a microcellular structure.
Tremco Silicone Extruded Sheet is made from 40-durometer dense translucent silicone.
Tremco Silicone Dense Rubber Extrusions are fabricated into gaskets and accessories for sealing and glazing applications in building construction.
Spectrem® 1 is an ultra low-modulus, high-performance, one-part, moisture-curing silicone joint sealant.
Spectrem® 2 is a medium-modulus, one-part, high-performance, neutral-cure silicone sealant ideal for a variety of perimeter caulking and glazing applications.
Spectrem® 3 is a general-purpose, low-modulus, high-performance, one-part, neutral-cure, non-staining, low dirt pickup, construction-grade silicone sealant.
Spectrem 4-TS is a multi-component, neutral-curing, nonstaining, low dirt pickup, low-modulus silicone sealant specially formulated for use in dynamically moving building joints.
Spectrem® 800 is a low-modulus, high-performance, one-part, gun-grade silicone parking structure and highway joint sealant.
Spectrem® 900SL is a low-modulus, high-performance, one-part, gun-grade silicone parking structure and highway joint sealant.
Spectrem® Simple Seal is an ultra-low modulus, preformed silicone tape extrusion specifically designed with high elongation properties that can be bonded to a wide range of substrates with Spectrem 1 or Spectrem 2 to provide a waterproof seal.
Superstop is a composite waterstop containing expandable, granular bentonite.
Tremco THC-900 and 901 are multi-component, chemically-curing polyurethane joint sealants that include a tintable base, curative packet and a choice of 70 standard colors.
Tremco 2011 is an open-weave fabric consisting of glass fiber yarn saturated with synthetic resins.
Tremco 2178 Glass Ply Sheet is an asphalt-impregnated fiberglass ply felt marked with laying lines and lightly dusted on one side with a fine mineral parting agent.
Tremco 2190 consists of a single ply of felt fully saturated and coated on both sides with premium asphalt and containing durable, interlocking cellulose fibers.
Tremco 2191AB is an inorganic reinforcing mat of high strength, non-woven glass fibers coated with an adhesive backing (AB).
Tremco® 2450 Protection Board is an extruded, hollow-core polypropylene/polyethylene copolymer used to provide protection for most commonly used waterproofing or roofing membranes, both during and after construction.
Tremco® 2550/2560 Protection Board is a semi-flexible asphaltic sheet with a core made from a blend of asphalt, plasticizer and inert fillers sandwiched between two skins of an asphalt-saturated fiberglass.
Tremco 830 is a one-part, thermoplastic, elastomeric sealant that provides a high-performance, flexible seal in glazing and siding applications.
Tremco Butyl Sealant is a blend of butyl rubber and polyisobutylene to form an economical, flexible sealant.
Tremco DualFlex® is a reinforcing flashing that consists of a central strip of stretchy SEBS rubber flanked on each side by an absorbent non-woven felt.
Tremco Epoxy Primer is a two-component (1:1) primer used as a compatible tie-in to create connectivity between TREMproof® below-grade waterproofing membranes, Vulkem® urethane coatings and ExoAir® air barrier membranes.
Tremco ET 675 is a 100 percent solid, cross-linked, preformed (extruded) butyl tape. Tremco ET 675 is non-oxidizing, non-film forming, and provides exceptional flow resistance when subjected to extreme vibration. (Available in Canada only)
Tremco Primer #1 is a quick-drying, one-part, moisture-curing primer used as an adhesion promoter for urethane sealants on porous surfaces such as concrete and wood. NOT for use in the United States.
Tremco Protection Mat is an ultra lightweight, extremely tough 14 oz. protection mat for waterproofing membranes in both vertical and horizontal applications.
A spunbound polyester fabric consisting of a nonwoven fabric of continuous filament polyester fibers that are randomly arranged.
Tremco Retention Squares are high-density polyethylene reservoir boards designed for use in GreenScape and amenity deck applications.
TREMDrain® is a two-layer drainage mat consisting of a polystyrene core and spun-bound polypropylene fabric.
TREMDrain® 1000 consists of a polystyrene core and spun-bound polypropylene fabric (PF).
TREMDrain® 2000 is a three-layer drainage mat including a woven polypropylene fabric, polystyrene core and polymeric film.
TREMDrain® 3000 is a two-part prefabricated drainage material and protection board consisting of a formed polystyrene core covered on one side with a woven polypropylene filter fabric.
TREMDrain® 6000 is a multi-composite prefabricated drainage material and protection board consisting of a formed polypropylene core covered on one side with a high strength, spun-bound polypropylene filter fabric.
TREMDrain® DPI is an optional drainage, protection and insulation board designed for use primarily with TREMproof® 260 Spray-Applied Waterproofing Membrane. TREMDrain DPI’s unique and proven glass fiber design promotes efficient water drainage and the retention of the board’s R-value while the semi-rigid nature of the board acts as a protection course.
TREMDrain® GS drainage mats consist of a perforated polystyrene core with fabrics attached to both sides. Installed with the dimples down, the core also functions as a water retention layer.
TREMDrain® QSP is a three-part prefabricated drainage panel and protection board consisting of a formed, perforated polystyrene core covered on the dimple side with a non-woven, needle-punched polypropylene filter fabric along with a breathable cross-hatched fabric on the backside.
TREMDrain® S, consisting of a spun-bound polypropylene fabric, polystyrene core and polymeric film backing, has the highest compressive strength within the TREMDrain Series.
TREMDrain® Total Drain is a two-layer drainage mat with a unique polystyrene core that consists of a high-profile drainage section for water collection and flow around the structure and a transition section to connect to other TREMDrain Series drainage mats.
Tremflex® 834 is a pure acrylic latex sealant formulated to provide a fast-setting, pliable seal with minimal shrinkage.
TremGlaze Butyl Sealant is a one-part, exterior-grade caulk ideally suited for applications with minimal total joint movement. It is formulated from a blend of butyl rubber and polyisobutylene.
TremGlaze® GT400 Tape is a 100% solid polyisobutylene cross-linked butyl, preformed sealant.
TremGlaze® GT800 Tape is a 100% solids, highly adhesive and elastic, cross-linked butyl preformed tape with a continuous EPDM shim.
TremGlaze® LEF is a versatile one-component, fire-rated, polyurethane foam in an aerosol can designed for window and door and retro-fit installations.
A multi-purpose cleaning agent used to dissolve uncured or fresh polyurethane foam and adhesive.
TremGlaze® S100 is a one-part, moisture-curing, acetoxy silicone sealant.
TremGlaze® S500 is a one-part, medium-modulus, neutral-curing silicone sealant
TremGlaze® S700 is a one-part, high-modulus, neutral-cure silicone sealant ideal for a wide variety of glazing applications.
TremGlaze® S900 is a two-component, high-performance reactive silicone designed for back-bedding of windows and door products.
TremGlaze® SA1100 is a pure acrylic latex sealant formulated to provide a fast-setting pliable seal.
TremGlaze® U1600 is a high-performance, low-modulus, one-component, moisture-curing polyurethane sealant.
TremGlaze® UA1300 is a high-performance, one-component urethane acrylic sealant.
TREMprime LV is a solvent-based modified bituminous roofing primer for use in preparing porous and non-porous surfaces for application of Tremproof 6100.
TREMprime® Multi-Surface Urethane Primer is a two-component, quick-drying, epoxy-based, VOC-compliant primer primarily for use with Vulkem® urethane deck coating and liquid-applied waterproofing products.
TREMprime® Non-Porous Primer is a low-VOC, water-based, quick-drying, one-part primer used as an adhesion promoter for urethane sealants and coatings on non-porous surfaces such as metals and plastics.
TREMprime® Silicone Metal Primer is a one-component primer used to enhance adhesion of silicone sealants on nonporous surfaces such as metals and plastics.
TREMprime® Silicone Porous Primer is a one-component primer used to enhance adhesion of silicone sealant to porous surfaces such as concrete and limestone.
TREMprime® WB Primer is a high-solids, water-based primer for use in preparing porous and non-porous surfaces for application of TREMproof 6100, 6100BM and 6145.
TREMprime® QD Low-Odor Primer is a quick drying, high-solids, modified bituminous roofing primer used with TREMproof® 6100 waterproofing membrane.
TremPro® 626 is a one-part, medium-modulus, gun-grade textured polyurethane sealant.
TremPro® 635 is a high-performance, low-to-medium modulus, one-component, gun-grade polyurethane sealant.
TremPro® 638 SSL is a high-performance, low-modulus, one-component, semi-self-leveling polyurethane sealant.
TremPro® 639 is a one-part, moisture-curing, pour-grade polyurethane joint sealant.
TremPro® 640 and 642 are one-part liquid polyurethane coatings for industrial use.
TremPro® 644 High Temperature Silicone Sealant is a one-part, ready-to-use silicone adhesive sealant.
TremPro® 644 RTV is a one-part, general purpose, acetoxy silicone sealant.
TremPro® 645 is a single-component, medium-modulus, neutral-cure silicone sealant that is easily gunnable over a wide range of temperatures and has excellent adhesion to most common substrates without the use of a primer.
TremPro® 651 is formulated from a blend of butyl rubber and polyisobutylene to form an economical, flexible sealant.
TremPro® 655 is a high-performance, siliconized acrylic latex sealant formulated to provide a fast-setting pliable seal with minimal shrinkage.
TremPro® 659 is a one-part, high-performance elastomeric sealant for use in a variety of applications.
TremPro® 691 is a 100% solid, cross-linked preformed butyl sealant.
TremPro® 696 is a 100% solid, macro-polyisobutylene preformed sealant with an integral, continuous EPDM spacer shim for increased structural performance.
TremPro® Cellular Rubber Extrusions are fabricated into gaskets and accessories for use in sealing and glazing industrial and transportation OEM applications.
TremPro® EPDM Rubber Extrusions are fabricated into gaskets and accessories for use in sealing and glazing industrial and transportation OEM applications.
TremPro® JS-773 is a high-solids, non-skinning, non-drying, synthetic, butyl elastomer sealant.
TremPro® MBRV is a high-quality tape compounded from butyl and polyisobutylene.
TremPro® Neoprene Rubber Extrusions are fabricated into gaskets and accessories for use in sealing and glazing industrial and transportation OEM applications.
TremPro® SCR-900 (Silicone-Compatible Rubber Extrusion) is fabricated into gaskets and accessories for use in sealing and glazing industrial and transportation OEM applications.
TremPro® Silicone Dense Rubber Extrusions are fabricated into gaskets and accessories for use in sealing and glazing industrial and transportation OEM applications.
TREMproof® 201/60 is a high-solids, VOC-compliant, modified polyurethane waterproofing membrane.
TREMproof® 250GC is a rapid-curing, high-solids, VOC-compliant modified polyurethane waterproofing membrane.
TREMproof® 260 Spray-Applied Waterproofing Membrane is a polymer-enhanced, single-component, fluid-applied asphalt emulsion below-grade waterproofing membrane.
TREMproof® 6100 is a one-part, 100% solids, hot-applied, rubberized asphalt waterproofing membrane.
TREMproof® 6100BM is a hot-applied rubberized asphalt waterproofing membrane.
TREMproof® 6145 is a hot-applied rubberized asphalt membrane for use in waterproofing underneath traffic-bearing asphalt and concrete overlays.
Tremsil® 200 is a one-part, acetoxy silicone sealant.
Tremsil 400 is a high-performance, medium-modulus, one component, neutral cure silicone sealant.
Tremsil® 600 is a one-part, neutral cure, fast-skinning, medium modulus silicone sealant.
TREMstop® Acrylic is a gunnable acrylic latex sealant designed for use in firestop applications, including both joints and through-penetrations.
TREMstop® Acrylic Spray is a single-component, water-based acrylic firestop sealant for use in fire-rated joints and through-penetrations.
TREMstop® Fire Mortar is a one-part, fast-setting, fire-resistive microsilica compound used to close large annular spaces to make a through-penetration easier to treat with a tested firestop system.
TREMstop® FS Blanket is a strong, lightweight, needled blanket of bio-soluble fibers. It is an inorganic product that exhibits no smoke generation or outgassing in service.
TREMstop® Fyre-Sil is a gun-grade, neutral cure silicone sealant for use in firestopping joints and through-penetrations.
TREMstop® IA+ is a high-performance, single-component firestop sealant that will expand to fill the voids left when combustible materials burn and deteriorate in a fire.
TREMstop® MCR is a metal restricting collar to be used in conjunction with TREMstop SuperStrip to provide a field-fabricated device to firestop combustible penetrations.
TREMstop® MP is a moldable, intumescent putty available in easy-to-use pad form for electrical outlet boxes.
TREMstop® Putty is a moldable firestopping putty in stick form.
TREMstop® Smoke & Sound Sealant is a high-performance acrylic sealant for use in smoke-rated partitions or joints and to prevent sound transmission through unprotected openings.
TREMstop® Smoke & Sound Spray is a high-performance acrylic sealant for use in smoke-rated partitions or joints and to prevent sound transmission through unprotected openings.
TREMstop® SuperStrip is an easy-to-install, flexible intumescent wrap strip designed for use with plastic pipe penetrations though fire-rated floors and walls.
TRS 600 is formulated from a blend of elastomers to produce a highly adhesive, flexible sealant.
Material Safety Data Sheets for Universal Color Packs, U.S. and Canada
VISIONstrip® is a precision-extruded glazing seal consisting of an EPDM rubber extrusion positioned at the sightline with a 100% solids, highly adhesive butyl preformed sealant bonded below.
Vulkem® 116 is a one-part, moisture-curing, gun-grade polyurethane sealant.
Vulkem® 350 is a single-component polyurethane basecoat that possesses tenacious adhesion to clean and dry concrete, wood and metal.
Vulkem® 350/345/346 is a modified polyurethane Traffic Deck Coating System composed of a basecoat (350), heavy-duty intermediate coat (345) and a topcoat (346).
Vulkem® 350/351 is an attractive composite waterproofing system composed of tough-curing liquid polyurethane.
Vulkem® 350NF is a single-component, low-VOC, low-odor polyurethane basecoat with tenacious adhesion primarily to clean and dry concrete, but also to wood and metal.
Vulkem® 350NF/345/346 is a modified polyurethane Traffic Deck Coating System composed of a base coat (350NF), heavy duty intermediate coat (345) and a top coat (346).
Vulkem® 350NF/351 is an attractive composite waterproofing system composed of tough-curing liquid polyurethane.
Vulkem® 350NF/351NF is a composite waterproofing system comprised of tough-curing liquid polyurethane.
Vulkem® 360NF is a low-odor, VOC-compliant, water-cured, rapid-setting polyurethane basecoat that can be applied at various thicknesses, making it ideal for patching and sloping areas on restoration jobs.
Vulkem® 360NF/351NF is a composite waterproofing system composed of tough-curing liquid polyurethane rubber that cures to form an attractive, seamless elastomeric rubber membrane system.
Vulkem® 950NF and 951NF topcoats are high-performance, neighbor-friendly, two-part polyurethane coatings for vehicular (heavy-duty) and pedestrian (medium-duty) application where low odor and extremely durable coatings are desired.
Vulkem® 360NF/951NF is a nearly 100 percent solids, VOC-compliant waterproofing and protective system that is highly resistant to UV and chemical attack.
Vulkem® 45 is a one-part, moisture-curing, pour-grade polyurethane joint sealant that is traffic-rated for both vehicular and pedestrian traffic
Vulkem® 45SSL is a one-part, moisture-curing, low-modulus polyurethane sealant especially developed for sealing joints in level and/or slightly sloped surfaces.
Vulkem® 801 is a liquid-applied, one-part polyurethane coating system that has been formulated to have a high tensile strength, tear strength and elongation all in a viscosity grade that can be used horizontally and vertically.
Vulkem® 950NF & 951NF Topcoats are high-performance, neighbor-friendly, two-part polyurethane coatings for vehicular (heavy-duty) and pedestrian (medium-duty) application.
Vulkem® Athletic System is an integral waterproofing/athletic play surface, composed of tough-curing liquid polyurethane rubber.
Vulkem® Mechanical Room Coating System is an integral waterproofing/flooring system composed of tough-curing liquid polyurethane rubber.
The Vulkem® OC810 Coating is a high-solids, aliphatic urethane membrane developed to be applied in one 35-40 mils coat for aesthetically pleasing, durable waterproofing protection. It is low odor, low VOC (less than 30g/L), mildew- and fungus-resistant and designed for use with Tremco Rubber Aggregate 12-20 mesh for soft texture and skid-resistance.
Vulkem® Primer #171 is a quick-drying, one-part, moisture-curing primer that enhances adhesion to concrete, plywood and other porous substrates. NOT for use in Canada.
Vulkem® Primer #191 is a quick drying, one-part, moisture-curing primer used as a urethane-to-urethane tie-in that prepares surfaces of cured Vulkem urethane sealants, coatings and membranes to be sealed with a fresh coat.
Vulkem® Roof Terrace/Deck Coating System is an integral waterproofing and decorative coating composed of tough curing liquid polyurethane rubber.
Vulkem® Under Tile Waterproofing System (350NF) is a durable waterproofing coating, composed of tough-curing liquid polyurethane rubber.
